The sandblasting process is to make the metal jewelry, which is a local sandblast surface according to the design requirements, so that the polishing surface of the metal jewelry is in sharp contrast to enhance the beauty of the lines of the jewelry. There are two types of quarrels: one is dry sand, and the other is water sand.
. The main tools required for sand spray
① sand spraying machine;
② air compressor; ③ King Kong sand ( Quartz sand);
④ protective rubber paper or protective wax
. Operation steps
1, jewelry that polished and cleaned does not need to be polished and cleaned. The sandblast site is protected with protective wax or protective tape. When applying protective adhesive paper or point protection wax, the lines should be smooth and neat.
2. Select the appropriate thickness of diamond sand as required, and place it in the sandblasting machine. Then debug the required air pressure.
3, handheld jewelry bad parts, put the sandblasting parts in the sandblasting machine, align the sandblast out of the sandblast, open the pressure valve, spray the diamond sand on the metal jewelry through the air pressure , Spray until it meets the requirements. The sandblast is complete and uniform to achieve the effect.
The factory is also called blowing sand. Not only is it rust, but it can also be removed by oil, which is very useful for painting. n00:00 / 00: 3270% shortcut keys to describe space: Play / suspend ESC: exit full screen ↑: increase volume 10% ↓: reduced volume decrease by 10% →: single fast forward 5 seconds studio Here you can drag no longer appear in the player settings to reopen the small window shortcut key description
The sandblasting process is to make the metal jewelry, which is a local sandblast surface according to the design requirements, so that the polishing surface of the metal jewelry is in sharp contrast to enhance the beauty of the lines of the jewelry. There are two types of quarrels: one is dry sand, and the other is water sand.
. The main tools required for sand spray
① sand spraying machine;
② air compressor;
③ King Kong sand ( Quartz sand);
④ protective rubber paper or protective wax
. Operation steps
1, jewelry that polished and cleaned does not need to be polished and cleaned. The sandblast site is protected with protective wax or protective tape. When applying protective adhesive paper or point protection wax, the lines should be smooth and neat.
2. Select the appropriate thickness of diamond sand as required, and place it in the sandblasting machine. Then debug the required air pressure.
3, handheld jewelry bad parts, put the sandblasting parts in the sandblasting machine, align the sandblast out of the sandblast, open the pressure valve, spray the diamond sand on the metal jewelry through the air pressure , Spray until it meets the requirements. The sandblast is complete and uniform to achieve the effect.
It's a kind of water mist
It is estimated that you are asking your teeth sandblasting, that is to remove the dirt on your teeth and achieve the role of cleaning.
The factory is also called blowing sand. Not only is it rust, but it can also be removed by oil, which is very useful for painting.
n00:00 / 00: 3270% shortcut keys to describe space: Play / suspend ESC: exit full screen ↑: increase volume 10% ↓: reduced volume decrease by 10% →: single fast forward 5 seconds studio Here you can drag no longer appear in the player settings to reopen the small window shortcut key description